APC by Schneider Electric Switched Rack PDU

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Product Type: PDU
Technical Information
PDU Type: Switched
Input Receptacles: NEMA L14-30P
Output Receptacles:

• 7 x IEC 60320 C13
• 1 x IEC 60320 C19
• 16 x NEMA 5-20R

Protection Type: Overload Protection
Power Description
Input Voltage:

• 120 V AC
• 230 V AC

Input Voltage Range: 120 V AC – 230 V AC
Output Voltage:

• 120 V AC
• 230 V AC

Power Rating (VA): 5760 VA
Input Current: 30 A
Management
Management:

• Web
• SNMP
• Telnet

Physical Characteristics
Mounting Orientation: Horizontal/Vertical
Mount Type: Rack-mountable
Rack Height: 0U
Height: 72″
Width: 2.2″
Depth: 1.8″
Weight (Approximate): 17.91 lb
Miscellaneous
Package Contents:

• Switched Rack PDU
• Installation Guide
• Rack Mounting Brackets
• Serial Configuration Cable
• Safety Guide

Environmentally Friendly: Yes
Environmental Certification:

• REACH
• RoHS

Warranty
Limited Warranty: 2 Year